depth of penetration การใช้

• Earlier assemblages, so-called DOP ( Depth Of Penetration )-matrices, were thicker.
• Unlike micro-MRI, micro-CT, micro-PET, and micro-SPECT, micro-ultrasound has a limited depth of penetration.
• After a specific time interval the depth of penetration is measured.
• The "'depth of penetration "'is the degree of intimacy a relationship has accomplished.
• While indenting various parameters, such as load and depth of penetration, can be measured.
• Each of these methods can increase the depth of penetration.
• While indenting, various parameters such as load and depth of penetration can be measured.
• They differ in intensity, configuration and depth of penetration.
• There are also physical limits to generating eddy currents and depth of penetration ( skin depth ).
• Electron energies typically varies from the keV to MeV range, depending on the depth of penetration required.
• But what is new is the sheer size and depth of penetration of this global fashion dream factory.
• He found that properly prepared gelatin was a reliable medium for predicting depth of penetration and bullet deformation.
• The depth of penetration and the rate of propagation in pitting corrosion are significantly greater than in crevice corrosion.
• Vertical resolution of MT mainly depends on the frequency being measured, as lower frequencies have greater depths of penetration.
• Over time, the particles tend to fall out of alignment, which reduces the depth of penetration at long standoffs.
• :: " " Optimal depth penetration is achieved in ice where the depth of penetration can achieve several hundred meters.
• Since depth of penetration depends on the excitation frequency, information from a range of depths can be obtained all at once.
• The depth of penetration is determined by the frequency of the electrical power supply and the metallurgical makeup of the steel.
• Because micro-PAT is still limited by the penetrating strength of light and sound, it does not have unlimited depth of penetration.
• The depth of penetration from the zero datum is measured from a dial, on which a harder material gives a higher number.